SUZHOU RICO MACHINERY CO., LTD

HSK 63F Plastic Tool Holder Forks for Automatic Tool Changer HSK CNC This plastic tool holder fork is the HSK 63F Tool Fork, also called HSK63F CNC Toolholder Clip, used with HSK 63F tool holder, like ISO30 tool forks used with ISO30 tool holders, BT30 BT40 tool forks used with BT30 BT40 tool holders. HSK63F Plastic Tool Changer Clip Specifications: 1. Made in China, famous brand, 2. Imported USA Dupont white plastic material, high quality, reinforced and anti-explosion. 3. Dynamic balance grade: G2.5, 30000rpm 4. Yaw precision: 0.005mm Tool Changer Clip Collet Unit For HSK with your HSK63F CNC toolholder, used with carousel drum type ATC CNC router or side loading linear auto toolchanger. These HSK 63 F plastic forks can easily found on many woodworking CNC routers centers including; Biesse, CNT Motion, CR Onsrud, DMS, Flexicam, Multicam, Northwood, among others. Maintenance: ATC tool clips wear out over time. If the HSK spindle is not clamping the tool properly, it may be the tool fork is worn which causes alignment issues. Always insert and remove tool holders laterally. Tool forks should be mounted in an area to reduce the exposure to cutting chips and debris as much as possible. Replace if worn or damaged. The tool holders and spindle taper must be maintained as well. A clean taper, free of debris and burrs will help prevent the tool from sticking. Apply a light coat anti-seize compound to the taper on a regular basis. Note: Never blow compressed air into the spindle taper. Compatibility: Can be used with all HSK 63F tool holders. We also can supply white and black ISO30 toolforks, DIN30 forks, BT30 tool forks, BT40 toolforks, etc Payment can be made by Western Union, Paypal, T/T. Welcome your inquiry!